
Safety TechnologyX20
X20SP1130X20 Safe Power Feed, 24V, 10A
📦3-4 weken
Max. Switching Frequency
5 times per minute with max. 2 HzHardware upgrade 2.2.0.0 and later: 120 times per minute with max. 2 HzSee section "Inrush current behavior for output channels" and table "Switching inductive loads".
Quantity
1
ATEX
Zone 2, II 3G Ex nA nC IIA T5 GcIP20, Ta (see X20 user's manual)FTZÚ 09 ATEX 0083X
Note
See section "Safety characteristics".
Minimum Load
15 mA
Standalone Mode
No
€ 489,06excl. BTWincl. BTW € 591,76
Zakelijk klant? Vraag een offerte aan of log in voor uw prijs.
Omschrijving
- 24 VDC power supply module for internal I/O power supply
- Safe cutoff of potential groups with standard outputs
- Safely switched potential can also be tapped externally1 safe digital output with 10 ASource circuit
- Output type BIntegrated output protection This module is equipped with 1 safe digital output. The nominal output current is 10 A. The power supply module is used for the internal I/O power supply.A safe digital output channel is integrated in the modu
- 24 VDC power supply module for internal I/O power supply
- Safe cutoff of potential groups with standard outputs
- Safely switched potential can also be tapped externally1 safe digital output with 10 ASource circuit
- Output type BIntegrated output protection This module is equipped with 1 safe digital output. The nominal output current is 10 A. The power supply module is used for the internal I/O power supply.A safe digital output channel is integrated in the module for cutting off the I/O power supply of connected X20 modules in safety-related applications up to PL e or SIL 3.The output is designed using semiconductor technology so that the safety-related characteristics do not depend on the number of operating cycles.The "High-side-High-side" variant (output type B) is required for actuators with reference potential (e.g. Enable inputs on frequency inverters). It is important to observe the special notices for the cabling in this case.In addition, the instructions for switching off X20 potential groups must be observed.The safe digital output channel provides protection against automatic restart when network errors occur.This module is designed for X20 12-pin terminal blocks.
Productinformatie
- Serie
- X20
- Land van herkomst
- AT

